Customization: | Available |
---|---|
Type: | Lithium-Polymer Battery Pack |
Connection Mode: | with PCM |
Still deciding? Get samples of US$ 1.55/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item |
Rating |
Note |
||
3.1 Capacity |
Typical |
530mAh |
Discharge:0.2CmA cut off Voltage:3.0V for cell |
|
Minimum |
500mAh |
|||
3.2 Nominal Voltage |
Average 3.7V |
Discharge:0.2CmA cut off Voltage:3.0V for cell |
||
3.3 AC Impedance Resistance |
≤160mΩ |
|
||
3.4 Discharge Cut-off Voltage |
3.00V |
|
||
3.5 Charge Current |
106mA |
Standard Charge |
||
3.6 Charge Voltage |
4.2V |
|
||
3.7 Max. Charge Voltage |
4.23V |
|
||
3.9 Max. Charge Current |
530mA |
1.0CmA |
||
3.10 Max. Discharge Current |
530mA |
|
||
3.11 Weight |
Approx 11.1g |
cell |
||
3.12 Operating Temperature |
Charge |
0~+45°C |
|
|
Discharge |
-20~+60°C |
|
||
3.13 Storage Temperature |
less than 1 month |
-20~+45°C |
Recommended Storage temperature: 20°C,at the shipment state |
|
less than 3 months |
-20~+35°C |
Company Introduction:
A&S Power Technology Co., Ltd. was established in 2001, and specialize in manufacturing and exporting rechargeable lithium battery, like li-ion battery, li-polymer battery, and LiFePO4 battery.
Company Overview
Advantage
1. Environmental friendly
2. High density of energy
3. Lightweight
4. Low self-discharge
5. Low internal resistance
6. Long cycle life, chargeable up to 500 times
7. No memory effect
8. Doesn't contain Mercury, No fire, No explosion, No leakage
One-Year-Warranty
1. We want you to be fully satisfied with every item that you purchase from A&S Power.
2. Furthermore, we also provide a one-year warranty for batteries.
3. And if any quality problems are not caused by improper use or man-made, A&S Power will replace it one by one.
1. Q: Where can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we'll regard your inquiry priority.
2. Q: How can I get a sample to check your quality?
A: After price confirmation, you can require for samples to check our quality.
3. Q: What about the lead time for mass production?
A: Honestly, it depends on your order quantity and the season you place the order. We suggested t hat you start inquiry two months before the date you would like to get the products at your country.
4. Q: What are your terms of payment?
A: We accept T/T and L/C.
Welcome to our factory, We are here to support you!